Stainless Steel Shots
Product List
Vibratory Finishing
Sand Blasting Machines
Sand Blasting Media
  Glass Beads
  Ceramic Beads
  Garnet
  Brown Fused Alumina
  White Fused Alumina
  Black Fused Alumina
  Steel Shot and Steel grit
  Metal Cut Wire Shot
  Stainless Steel Shots
  Copper Slag
  Plastic Blasting Media
Abrasives
Centrifugal Casting Machines
Traffic Marking Equipments
Others
Home
Stainless Steel Shots
Stainless Steel Shots are widely used for deburring and brightening of the surface of aluminium alloy, zinc alloy, colorful metal and stainless steel, etc. They are of austenite structure with execellent features of high strengh and tough, low consumption, none dust, quick clean speed and good clean results. They can extend fatigue life, enhance corrosion- resisting and brighten the surface of parts. The hardness for new material state is appro 300HV, for usage state is about 450HV. Its specific gravity is 7.8g/cm3 and bulk density is 4.7g/cm3.
 
Physical & Chemical Specification.

C =0.15-0.20%
Si=1.5-2.5%
Mn=0.9-1.2%
Ni=7.0-10.0%
Cr=16-20%
Other
Remark: Hardness: Before Use HV-250
After Use HV-450
cast stainless steel shot
 
Size Distribution
Size(mm)
 3.5 3.0 2.5 2.00 1.70 1.40 1.25 1.00 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.14 0.09 <0.09
S10                             5%max      
S20                           5%max     90%min  
S30                       5%max       90%min    
S40                 5%max       90%min          
S50               5%max     90%min              
S60             5%max     90%min                
S100           5%max   90%min                    
S150         5%max   90%min                      
S200       5%max   90%min                        
S300   5%max     90%min                          
Size mm 3.5 3.0 2.5 2.0 1.7 1.4 1.25 1.0 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.14 0.09 <0.09
Tel: + 86 755 83660116, Fax:83660909, szkaite@hotmail.com, info@kaiteindustry.cn
Copyright 2006 Kaite All rights reserved.