|
 |
 |
|
| Silicone Rubber |
A wide range of specially formulated silicone rubbers to meet different demands for spin casting of low-melt zinc alloy and tin-lead alloy.
Available sizes
Diameter: 9¡±, 12¡±, 14¡±, 16¡±, 18¡±
Thickness: 5mm-10mm |
 |
|
| Code |
Aplication / specification |
|
| PA |
suitable for zinc alloy spin casting.
Vulcanizing temperature: 165 oC
Vulcanizing time: 60mins.
Shore hardness after vulcanizing: 75
Tear-resistant strength: 98Mpa
Elongation: 32%
Highest heat-resistance (10 secs):750 oC |
 |
| GA |
suitable for tin-lead alloy spin casting of flat parts
Vulcanizing temperature: 150-165 oC
Vulcanizing time: 60 mins.
Shore hardness after vulcanizing: 65
Tear-resistant strength: 80Mpa
Elongation: 58%
Highest heat-resistance (10 secs):500 oC
|
 |
| BA |
suitable for tin-lead alloy spin casting of miniature figurines,? photo frame etc.
Vulcanizing temperature: 165 oC
Vulcanizing time: 60 mins.
Shore hardness after vulcanizing: 70
Tear-resistant strength: 95Mpa
Elongation: 72%
Highest heat-resistance (10 secs):500 oC
|
 |
| YB |
Specially developed cheaper silicon rubber, mainly used to reduce cost, half or 1/3 thick of the mold, not directly contact alloy.
|
 |
|
|
Tel: + 86 755 83660116, Fax:83660909, szkaite@hotmail.com, info@kaiteindustry.cn
Copyright 2006 Kaite All rights reserved. |
|
|
|
|
